New Holland W50C TC Wheel Loader Specs
New Holland W50C TC Height, Length, Width, and More
Heavy Haulers specifications database is your one stop shop for specs and dimensions of New Holland wheel loaders. By simply searching for the model, manufacturer or industry, you will find specs and dimensions of any New Holland wheel loader here. It's important to start by surveying your jobsite to ensure that you have an idea of the specs and dimensions to look for in a New Holland wheel loader. Without considering your jobsite, you might end up getting a New Holland wheel loader that won’t meet your jobsite requirements. It can either be too small to get enough work done or too big for a congested jobsite.
What Is A New Holland Wheel Loader Used For?
New Holland wheel loaders are used in construction sites to scoop to load materials in trucks or move them around the jobsite. In case you decide to get a used New Holland wheel loader, make a point of inspecting it or finding a professional to do it for you. This is because despite having suitable specs and dimensions for your jobsite, the previous owner might have not maintained it well. We recommend the best trailers for transport.
New Holland W50C TC Wheel Loader Specifications:
- » Wheelbase: 6.81 ft in
- » Dig Depth: 2.88 in
- » Dump Height - Fully Raised, 45° Dump: 94.34 in
- » Ground Clearance Under Axles: 12.64 in
- » Angle Of Departure: 28 degrees
- » Hinge Pin Height - Fully Raised: 122.56 in
- » Operating Height - Fully Raised With Spillgaurd: 55.12 in
- » Overall Length - Bucket Level On Ground: 205.48 in
- » Overall Width Without Bucket: 68.51 in
- » Rear Axle Oscillation, Total: 18 degrees
- » Total Angle: 80 degrees
- » Tread Width: 55.12 in
- » Turning Angle -From Center: 40 degrees
- » Turning Radius - Outside: 12.21 ft in
- » Ground Clearance Under Shaft: 17.49 in
- » Bucket Reach - 7 Ft 0 (2.13m), 45° Dump: 37.33 in
- » Bucket Reach - Fully Raised, 45° Dump: 26.3 in
- » Cab Height: 96.78 in
